Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2012 >> Pilot 2WD V6-3.5L >> Repair and Diagnosis >> Instrument Panel, Gauges and Warning Indicators >> Driver/Vehicle Information Display >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Driver/Vehicle Information Display: Service and Repair




Multi-Information Switch Test/Replacement

NOTE: SRS components are located in this area. Review the SRS component locations Locations, and precautions and procedures Service and Repair before doing repairs or servicing.

1. Remove the driver's airbag assembly Driver's Airbag Replacement.

2. Disconnect the 20P connector (A) from the cable reel.





3. Check for continuity between cable reel 20P connector terminals No. 16 and No. 17.
There should be continuity.

- If the check is OK, but the system does not operate, check for the cable reel or audio remote switch.
- If the check is not as specified, go to step 4.

4. Remove the three screws (A), then remove the steering wheel trim (B), and disconnect connectors (C) from each switches.





5. Remove the cover (D).

6. Remove the switch mounting screws, then remove the multi-information switch (E) from the steering wheel trim.

7. Measure the resistance between terminals No. 1 and No. 5 in each position according to the table.





8. If the resistance is not as specified or LED does not turn on, replace the multi-information switch. If the switch is OK, but there is a problem with the switch function, check the cable reel or the audio remote switch.

pro multis · About Operation CHARM