Center Console Trim Disassembly/Reassembly

Center Console Trim Disassembly/Reassembly

NOTE: Take care not to scratch the center console.

1. Remove the center console trim.

2. Disassemble the center console trim.

1. Disconnect the accessory power socket connector (A) and the console box light bulb socket (B), and detach the harness clips (C).

2. Remove the TORX screws (D) with a TORX T20 bit, then remove the console vent (E) and the console duct (F).

3. Remove the TORX screws (G) with a TORX T20 bit, then remove the hooks (H).





3. Reassemble the console trim in the reverse order of disassembly, and make sure the accessory power socket connector and the console box light bulb socket are plugged in properly.