Glove Box Light Test/Replacement

Glove Box Light Test/Replacement

1. Remove the glove box Glove Box Removal/Installation.

2. Disconnect the 2P connector (A) from the glove box light (B).









3. Check for continuity between terminals No. 1 and No. 2.

- With the button (C) released, there should be continuity.
- With the button (C) pressed, there should be no continuity.

4. If the continuity is not as specified, check the bulb (D). If the bulb is OK, replace the light.

5. Install the light in the reverse order of removal.