Cupholder Replacement
CUPHOLDER REPLACEMENTREMOVAL PROCEDURE
1. Remove shifter handle from shifter.
2. Loosen screws, remove console cupholder from center console.
INSTALLATION PROCEDURES
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install center console cupholder to center console.
Tighten
Tighten the screws to 1.6 N.m (14 lb in).
2. Install shift handle to shifter and use hex nut to fasten in place.
Tighten
Tighten the nut to 1.6 N.m (14 lb in).