Operation CHARM: Car repair manuals for everyone.
Home >> Hummer >> 2003 >> H2 V8-6.0L >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Evaporative Emissions System >> Evaporative Emission Control Canister >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Evaporative Emission Control Canister: Service and Repair

EVAPORATIVE EMISSION (EVAP) CANISTER REPLACEMENT

REMOVAL PROCEDURE




1. Raise the vehicle. Refer to Vehicle Lifting.
2. Disconnect EVAP solenoid electrical connector.
3. Remove the evaporative emission (EVAP) canister mount bolts.




4. Disconnect the pipes at the EVAP canister.
5. Remove the EVAP canister from the vehicle.

INSTALLATION PROCEDURE




1. Install the EVAP canister to the vehicle.
2. Connect EVAP solenoid electrical connector.

NOTE: Refer to Fastener Notice in Service Precautions.




3. Install the EVAP canister mounting bolts.

Tighten
Tighten the bolts to 25 N.m (18 lb ft).

4. Connect the pipes to the EVAP canister.
5. Lower the vehicle.
pro multis · About Operation CHARM