Operation CHARM: Car repair manuals for everyone.
Home >> Hummer >> 2003 >> H2 V8-6.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 5. 2-4 Servo Cover and Assembly Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

5. 2-4 Servo Cover and Assembly Removal

2-4 SERVO COVER AND ASSEMBLY REMOVAL

TOOLS REQUIRED
J 29714-A Servo Cover Compressor




1. Install the J 29714-A.

IMPORTANT: If cover does not move inwards with tool, use a block of wood or suitable material and lightly tap on cover using a hammer to free up cover in bore.




2. Tighten the bolt using J 29714-A to compress the servo cover.




3. Remove the servo cover retaining ring and the J29714-A.




4. Remove the servo cover and O-ring seal. If the servo cover seems to be hung up on the seal, cut and remove the O-ring seal before removing the cover.
5. Remove the 2-4 servo assembly.
pro multis · About Operation CHARM