62. Oil Pump Body Bushing Replacement

OIL PUMP BODY BUSHING REPLACEMENT

REMOVAL PROCEDURE

TOOLS REQUIRED
- J 41778-1 Pump Body Bushing Installer/Remover
- J 41778-2 Pump Body Bushing Position Stop




1. Inspect the oil pump body for the following defects:
- Worn or damaged bushings
- Foreign material or debris
- Porosity
- Scored or irregular mating faces
- Cross channel leaks
- Ring groove damage




2. Remove the front helix retainer (244).
3. Remove the oil seal assembly (243).




4. Using the J 41778-1 with an arbor press, remove the pump body bushing (242).




5. Using J 41778-1 with an arbor press, install a new pump body bushing (242).




6. Use the J 41778-2 to ensure proper bushing depth.