Operation CHARM: Car repair manuals for everyone.
Home >> Hummer >> 2003 >> H2 V8-6.0L >> Repair and Diagnosis >> Windows and Glass >> Windshield >> Windshield Moulding / Trim >> Service and Repair >> Windshield Pillar Reveal Molding Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Windshield Pillar Reveal Molding Replacement



Windshield Pillar Reveal Molding Replacement

Removal Procedure





1. Remove the air inlet grille panel. Refer toAir Inlet Grille Panel Replacement - Non Functional (Air Inlet Grille Panel Replacement - Non Functional) .
2. Remove the retaining screws.
3. Apply outward pressure at the bottom of the windshield pillar reveal molding to release the adhesive strip.
4. Pull the molding down to disengage the windshield pillar reveal molding from the roof rack.
5. Remove from the vehicle.



Installation Procedure





1. Install the windshield pillar reveal molding to the vehicle.
2. Push the molding up to engage the windshield pillar reveal molding into the roof rack.
3. Apply inward pressure at the bottom of the windshield pillar reveal molding to wet out the adhesive strip.

Notice: Refer toFastener Notice in Cautions and Notices.

4. Install the retaining screws.

Tighten the screws to 3 Nm (26 lb in).

5. Install the air inlet grille panel. Refer toAir Inlet Grille Panel Replacement - Non Functional (Air Inlet Grille Panel Replacement - Non Functional) .


pro multis · About Operation CHARM