Front Bumper Replacement

Front Bumper Replacement





1. Remove the 2 lower bolts from the bumper bar.
2. Remove the 2 plugs from the front fascia.
3. Disconnect the electrical connector to the DRL lamps.




4. Remove the 2 upper bolts from the bumper bar.
5. Remove the front bumper assembly from the vehicle.



Installation Procedure

1. Install the front bumper assembly to the vehicle.





Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the 2 upper bolts to the bumper bar.

Tighten the bolts to 85 Nm (63 lb ft).

3. Connect the electrical connector to the DRL lamps.
4. Install the 2 plugs to the front fascia.




5. Install the 2 lower bolts to the bumper bar.

Tighten the bolts to 85 Nm (63 lb ft).