Operation CHARM: Car repair manuals for everyone.
Home >> Hummer >> 2004 >> H2 V8-6.0L >> Repair and Diagnosis >> Body and Frame >> Cowl >> Cowl Moulding / Trim >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cowl Moulding / Trim: Service and Repair



Air Inlet Grille Panel Replacement

Removal Procedure

1. Remove the non-functional air inlet caps. Refer toNon-Functional Air Inlet Grille Panel Replacement (Non-Functional Air Inlet Grille Panel Replacement) .
2. Remove the wiper arms. Refer toWindshield Wiper Arm Replacement in Wipers/Washer Systems.




3. Disconnect the wiper hose connection (1).
4. Using a flat-bladed tool, remove the push-in retainers (2).
5. Remove the side fasteners.
6. Using a flat-bladed tool, release the 4 retainers (3) securing the air inlet grille to the vehicle.
7. Remove the air inlet grille from the vehicle.



Installation Procedure





1. Align the air inlet grille to the vehicle, and secure grille by ensuring all 4 retainers (3) are properly seated.
2. Connect the washer hose connection (1).
3. Install the push-in retainers.

Notice: Refer to Fastener Notice Service Precautions in Cautions and Notices.

4. Install the side fasteners.

Tighten the fasteners to 2.5 Nm (22 lb in).

5. Install the wiper arms. Refer toWindshield Wiper Arm Replacement in Wipers/Washer Systems.
6. Install the non-functional air inlet caps. Refer toNon-Functional Air Inlet Grille Panel Replacement (Non-Functional Air Inlet Grille Panel Replacement) .


pro multis · About Operation CHARM