Steering Column Bracket Replacement

Steering Column Bracket Replacement

Removal Procedure

1. Loosen and move center console reward for access to the knee bolster bolt. Refer to Console Replacement (Console Replacement) .
2. Remove the screws/bolts that hold the knee bolster trim panel to the I/P. Refer to Driver Knee Bolster Panel Replacement (Driver Knee Bolster Panel Replacement) .




3. Remove the nuts that hold the knee bolster deflector to the I/P .



Installation Procedure






Notice: Refer to Fastener Notice Service Precautions in Cautions and Notices.

1. Align and fasten the nuts that hold the knee bolster deflector.

Tighten the nuts to 2 Nm (18 lb in).

2. Fasten the screws/bolts that hold the knee bolster trim panel to the I/P . Refer to Driver Knee Bolster Panel Replacement (Driver Knee Bolster Panel Replacement) .
3. Align and move forward center console in place and fasten to the center console bracket. Refer to Console Replacement (Console Replacement) .