Operation CHARM: Car repair manuals for everyone.
Home >> Hummer >> 2004 >> H2 V8-6.0L >> Repair and Diagnosis >> Body and Frame >> Locks >> Trunk / Liftgate Lock >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Trunk / Liftgate Lock: Service and Repair



Liftgate Lock Plate and Rod Replacement

Removal Procedure





1. Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement (Liftgate Trim Panel Replacement) .
2. Disconnect the lock actuator electrical connection.
3. Disconnect the latch control cables by releasing the retainers (2) and removing the cable ends from the cups. Note the routing.
4. Remove the fasteners (1) retaining the control assembly to the liftgate.
5. Remove the lock plate assembly from the liftgate.



Installation Procedures






Notice: Refer to Fastener Notice Service Precautions in Cautions and Notices.

1. Position the lock plate assembly in place on the liftgate, and install the fasteners (1) retaining the control assembly to the liftgate.

Tighten the fasteners to 9 Nm (7 lb ft).

2. Connect the latch control cables (2) to the control assembly by placing the cable ends in their cups and securing the retainers. Note the proper routing.
3. Connect the lock actuator electrical connector.
4. Inspect for proper operation.
5. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement (Liftgate Trim Panel Replacement) .


pro multis · About Operation CHARM