Identification Lamp Replacement
IDENTIFICATION LAMP REPLACEMENTREMOVAL PROCEDURE
1. Insert a flat-bladed tool underneath the lamp on the notched side, to disengage the retaining clip.
2. Tilt the lamp back to disengage the hook.
3. Remove the electrical harness at the connector.
4. Remove the lamp from the vehicle.
5. Turn the bulb socket counterclockwise to remove the bulb from the lamp assembly.
6. Remove the bulb from the socket.
INSTALLATION PROCEDURE
1. Install the bulb to the socket.
2. Turn the bulb socket clockwise to lock the socket into the lamp assembly.
3. Install the lamp assembly to the vehicle.
4. Install the electrical harness at the connector.
5. Tilt the lamp forward to engage the hook.
6. Apply light pressure downward on the lamp to engage the retaining clip.