90. Intake Manifold Installation
Intake Manifold Installation
1. Install a new intake manifold gasket.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the intake manifold and bolts.
Tighten the intake manifold bolts from the inside out to 10 N.m (89 lb in).
3. Install a new throttle control module gasket.
4. Install the throttle control module.
5. Add threadlock GM P/N 12346004 (Canadian P/N 10953480) to the throttle control module bolt threads.
6. Install the throttle control module bolts.
Tighten the throttle control module bolts to 10 N.m (89 lb in).