Operation CHARM: Car repair manuals for everyone.
Home >> Hummer >> 2007 >> H3 L5-3.7L >> Repair and Diagnosis >> Lighting and Horns >> Turn Signals >> Turn Signal Switch >> Service and Repair >> Multifunction Turn Signal Switch Housing Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Multifunction Turn Signal Switch Housing Replacement



Multifunction Turn Signal Switch Housing Replacement

Removal Procedure

Caution: refer to restraint system service precautions.

1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Remove the steering wheel from the steering column.
3. Remove the steering column trim covers.
4. Remove the turn signal multifunction switch.




5. Remove 2 washer head screws from the switch mounting plate.
Slide the switch mounting plate from the steering column shaft.

Installation Procedure




1. Slide the switch mounting plate onto the steering column shaft.

Notice: Refer to Fastener Notice.

2. Install 2 washer head screws into the switch mounting plate.

Tighten the screws to 2.5 N.m (22 lb in).

3. Install the turn signal multifunction switch.
4. Install the steering column trim covers.
5. Install the steering wheel to the steering column.
6. Enable the SIR system. Refer to SIR Disabling and Enabling.

pro multis · About Operation CHARM