Operation CHARM: Car repair manuals for everyone.
Home >> Hummer >> 2008 >> H2 V8-6.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Differential Assembly >> Service and Repair >> Removal and Replacement >> Front Drive Axle >> Front Axle Vent Hose Connector Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Axle Vent Hose Connector Replacement



Front Axle Vent Hose Connector Replacement

Removal Procedure

1. Raise the vehicle. Refer Lifting and Jacking the Vehicle (Maintenance) .
2. Remove the engine protection shield. Refer to Engine Protection Shield Replacement (Service and Repair) .




3. Disconnect the vent hose from the vent hose connector.




4. Remove the vent hose connector.



Installation Procedure






Notice: Refer to Fastener Notice (Fastener Notice) .

1. Install the vent hose connector.

Tighten the vent hose connector to 20 N.m (15 lb ft).





2. Connect the vent hose to the vent hose connector.
3. Install the engine protection shield. Refer to Engine Protection Shield Replacement (Service and Repair) .
4. Lower the vehicle.


pro multis · About Operation CHARM