Inner Manual Linkage Installation

Inner Manual Linkage Installation





1. Install the parking lock bracket (86).

Notice: Refer to Fastener Notice .

2. Install the parking lock bracket bolt (87).

Tighten the bolt to 31 N.m (23 lb ft).

3. Inspect the following items:

* The parking brake pawl (81) for damage or cracks
* The parking pawl return spring (80) for being broken or missing





4. Inspect the following items:

* The manual shaft retainer (83) for damage or cracks
* The manual shaft (84) for damage or burrs
* The parking lock actuator assembly (85) for damage
* The inside detent lever (88) for damage or cracks
* The manual valve link (89) for damage
* The hex head nut (90) for damage or stripped threads

5. Install the following items:

* The inside detent lever (88)
* The parking lock actuator assembly (85)
* The manual shaft (84) (model dependent)
* The manual shaft retainer (83)
* The hex head nut (90)
* The manual valve link (89)

Tighten the nut to 31 N.m (23 lb ft).