Operation CHARM: Car repair manuals for everyone.
Home >> Hummer >> 2008 >> H3 L5-3.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Input Carrier Inspection and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Input Carrier Inspection and Installation



Input Carrier Inspection and Installation


Special Tools
* J 36850 Transjel Lubricant
* J 29837-A Output Shaft Support Fixture






1. Inspect the input carrier captive thrust bearing assembly. To check the captive thrust bearing in the input carrier (662) for wear, place a bushing or an output shaft sleeve (690) onto the bearing race and turn it with the palm of your hand. Do not touch the pinion gears. Any imperfections will be felt through the bushing.




2. Install the thrust bearing assembly (663) on the input carrier (662). Retain bearing with J 36850 .
3. Install the input carrier assembly (662) onto the output shaft. The carrier assembly can be either a 4 or 5 pinion design, depending on model.





Important:
* Do not reuse the old output shaft to input carrier retainer (661).

* Do not over expand the new output shaft to input carrier retainer during installation.



4. Install a new output shaft to input carrier retainer (661).




5. Remove the J 29837-A .


pro multis · About Operation CHARM