Operation CHARM: Car repair manuals for everyone.
Home >> Hummer >> 2008 >> H3 L5-3.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Reverse Input Clutch Bushing Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Reverse Input Clutch Bushing Replacement



Reverse Input Clutch Bushing Replacement

Removal Procedure


Tools Required
* J 25019 Bushing Service Set
* J 34196-B Transmission Bushing Service Set
* J 7004-A Universal Remover
* J 8092 Driver Handle






1. Inspect the reverse input clutch housing and drum assembly for the following conditions:

* Damaged or worn bushings
* Surface finish on the hub and outer housing - check band surface for flatness
* Leak at the weld
* Heat distortion
* Rolled or distorted retaining ring groove





2. Using the J 25019-16 with the J 7004-A , remove the reverse input clutch front bushing (603).




3. Using the J 25019-4 with the J 8092 , remove the reverse input clutch rear bushing (606).



Installation Procedure





1. Using the J 25019-9 with the J 8092 , install a reverse input clutch front bushing (603).




2. Using the J 34196-3 which is part of kit J 34196-B with the J 8092 , install a reverse input clutch rear bushing (606).


pro multis · About Operation CHARM