Generator Cable Replacement

Generator Cable Replacement

Removal Procedure
Warning: Refer to Battery Disconnect Warning (Service Precautions).


1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Battery Negative Cable Disconnection and Connection).




2. Remove the generator cable from the generator, perform the following:

1. Reposition the boot to expose the stud.
2. Remove the generator cable nut.
3. Remove the generator cable from the stud.




3. Open the positive cable junction block.
4. Remove the generator cable nut.
5. Remove the generator cable (2) from the junction block.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the generator cable (2) to the junction block.
2. Install the generator cable nut and tighten to 9 Nm (80 lb in).
3. Close the positive cable junction block.




4. Install the generator cable to the generator, perform the following:

1. Install the generator cable to the stud.
2. Install the generator cable nut and tighten to 9 Nm (80 lb in).
3. Position the boot to cover the stud.

5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Battery Negative Cable Disconnection and Connection).