Air Suspension Control Module Programming and Setup

Air Suspension Control Module Programming and Setup

Programming and Setup Procedures

Each of the following service procedures requires no programming after replacement but does require a setup procedure.

Air Suspension Control Module Replacement

If the electronic suspension control module is replaced, the following setup procedure must be performed:

Refer to Suspension Position Calibration (Suspension Position Calibration).

Air Spring Leveling Sensor Replacement

If an air spring leveling sensor is replaced, the following setup procedure must be performed:

Refer to Suspension Position Calibration (Suspension Position Calibration).

Compressor Assembly Automatic Level Control Replacement

If the compressor assembly automatic level control is replaced, the following setup procedure must be performed:

Refer to Suspension Position Calibration (Suspension Position Calibration).