Washer System

Fig. 5 Washer Motor Operation Check:

1. With the washer motor installed in the washer tank, fill the tank with washer fluid.
2. Connect the positive lead from battery voltage to terminal 2 and negative lead to ground, Fig. 5.
3. Ensure washer motor runs and washer fluid is ejected.
4. If fluid is not ejected, check washer fluid contact point.
5. Adjust washer fluid contact point by using a metal wire to move the washer nozzle ball.
6. If the amount of washer fluid ejected is too little, check for clogged, bent or crushed piping. Check the clipped points as the tube may be crushed.