Rear

1. Raise and support vehicle, then remove wheel and tire assembly.
2. Remove trailing shoe key retaining screw.
3. Release parking cable adjusting nut, then remove parking brake cable.
4. Remove brake caliper hose.

Fig. 4 Exploded View Of Rear Disc Brake Assembly:

5. Remove caliper assembly, refer to Fig. 4. Position caliper aside using a suitable wire.
6. Remove ABS wheel speed sensor.
7. Remove brake pads.
8. Install pads clips, then the pads onto each clip.
9. Press piston into cylinder using suitable tool.
10. Lower and insert brake cylinder. Tighten bolts to specifications.