Part 2

11. Install the N-D control valve, N-D control sleeve, and N-D plate.






12. Install the 2-3/4-3 shift valve and the 2-3/4-3 shift spring.






13. Install the rear clutch exhaust spring and rear dutch exhaust valves A and B.






14. Install the shift-control valve and shift control spring.






15. Install the regulator valve and regulator spring.






16. Install the torque converter control valve and torque converter control spring.






17. Install the pressure control valve and pressure control spring.






18. Install the adjustment screw and front end cover. Tighten the bolts to the specified torque.






19. Install, in the upper valve body, the three steel balls, the teflon ball, and the stopper plate.






20. Install the upper separating plate.






21. Install the block.






22. Install the special tool (09456-21000). Then, after securing the upper separating plate and the intermediate plate with the eight installation bolts, remove the special tool.






23. Install to the intermediate plate, the oil filter, the two steel balls, and the spring.






24. Install the special tool (09456-21000) to the intermediate plate.






25. Install the separating plate.






26. After securing the lower valve body using the 13 installation bolts, remove the special tool.






27. Install the valve stopper and clamp.






28. Install the manual valve.






29. Secure the tour solenoid valves using the installation bolts.