Rear

1. Disconnect battery ground cable.
2. Remove wiper arm and blade assembly.
3. Remove tailgate trim.
4. Disconnect electrical connector, remove wiper motor retaining nuts and wiper motor.
5. Reverse procedure to install noting the following:
a.When installing wiper arm and blade assembly, ensure wiper blade is 1.5-1.75 inches above bottom of rear window, with wiper motor in Park position.
b.Torque rear wiper motor mounting bolts to 14-19 ft. lbs.
c. Torque wiper arm assembly mounting bolt to 6-10 ft. lbs.