Replacement

DISASSEMBLY
1. Remove the timing belt as described under Timing Components.
2. Remove the Cylinder Head Assembly.
3. Remove the drive plate and transaxle mounting plate as described under Transmission and Drivetrain.
4. Remove the oil pan as described under Engine Lubrication.
5. Remove the Oil Pump Case.
6. Remove the crankshaft as described under Crankshaft Main Bearing.
7. Remove the connecting rods and pistons as described under Piston, Engine.
8. Remove motor mount and roll stopper brackets as described under Drive Belts, Mounts, Brackets and Accessories.

ASSEMBLY
Assembly is the reverse of disassembly.