Removal and Installation

COMPONENTS

REMOVAL







1. Disconnect the negative terminal from the battery




2. Loosen the belt tension.




3. Raise the vehicle.
4. Remove the mud guard RH
5. Disconnect the generator B+ terminal wire and connector.




6. Remove the belt and generator mounting bolt (2EA).
7. Remove the generator assembly.
8. Installation is the reverse order of removal.

INSTALLATION




1. Position the generator and insert the support bolt. (Do not attach the nut.)
2. Push the generator forward and determine how many spacers (thickness: 0.198 mm) should be inserted between the front leg of the generator and the front case (space A in the illustration). (There should be enough spacers so that they do not fall out when you let go of them.)
3. Insert the spacers (space A in the illustration), attach the nut, and complete the installation.