Sensor Inspection

[1][2]FUEL TANK PRESSURE SENSOR
This is the sensor to detect the fuel tank leakage in way which it measures the differential pressure between inside and outside fuel tank.







Inspection
Check to look that fuel level is over 15%. If not , this inspection is not available.
The vehicle must be in turn-on and at idle. Don't forget it.
1. Prepare a voltmeter and connect it to FPS pins as shown.
2. After 20 min.' idling, inspect the voltage

System voltage 5V, At accelerate Max. 4.5V, Min. 0.5V

3. At idle, inspect that voltage fluctuates up to accelerate rpm up and down

NOTE: If voltage is not within spec.as procedures, there is leakage and inspect the fuel tank and hoses toward canister and fuel neck. Then repair or replace relevant parts.