Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Windows: Service and Repair




COMPONENT

REMOVAL
1. Remove the quadrant inner cover.




2. Remove the rear view mirror mounting screws and then remove the rear view mirror.
3. Disconnect the remote control connector.




4. Remove the safety lock knob.
Remove the screws from the door.




5. Insert a screwdriver between the trim fasteners and door panel to pry it loose.
Disconnect the connectors. (Power Window Motor, Power Window Main Switch, Door Lock Actuator, Outside Mirror and Trunk Lid Opener Switch)




6. Remove the door trim seal.
7. Detach the regulator assembly.




8. Disconnect the power window motor from the regulator assembly.


CAUTION: When loosening the mounting screws of the regulator and the motor assembly, the compressed force of the regulator spring may cause the regulator arm to spring up.

INSTALLATION




1. Installation is the reverse of removal procedure.


CAUTION: When installing the door trim seal, butyl tape should not be placed over door trim fastener mounting area.