Removal and Installation

REMOVAL




1. Remove the distributor cap.




2. Remove the power steering pressure hose nut.




3. Loosen the tensioner and remove the V-belt.




4. Remove the timing belt cover cap and the timing belt upper cover (A).




5. Remove the generator from the engine compartment.

INSTALLATION

1. Position the generator and insert the support bolt. (Do not attach the nut.)




2. Push the generator forward and determine how many spacers (thickness : 0.198 mm) should be inserted between the front leg of the generator and the front case (space A in the illustration). (There should be enough spacers so that they do not fall out when you let go of them.)
3. Insert the spacers (space A in the illustration), attach the nut, and complete the installation.
4. After installation, be sure to check for power steering