Self-Diagnosis Checking

Self-diagnosis checking is performed when there has been an automatic cancellation, without cancel switch operation.




1. The following methods can be used for checking the diagnosis. Note that the date link connector is located in the fuse box.
1. If a indicator lamp is used. Connect directly between the ground terminal and the terminal for CC of the data link connector. It is possible to discover which circuit is the cause of the cancellation by verifying the indication shown by the indicator lamp with the display patterns shown.




2. All diagnostic trouble codes are stored so that it is possible to check it a problem occurred in the past or not until disconnecting the battery terminals, even when the ignition key is turned to OFF.

CC : Cruise control




Diagnosis display patterns and codes