Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Component Inspection
SENSOR INSPECTION 1.
Disconnect the
knock sensor connector.
2.
Measure resistance between the terminal 2 and 3.
Standard value about 5 MOhms [at 20°C (68°F)] 3.
If the resistance is continual, replace the
knock sensor.
Tightening torque
Knock sensor 16 - 28 Nm (160 - 250 kg.cm, 11.8 - 18.4 lb.ft) 4.
Measure the capacitance between the terminal 2 & 3.
Standard value 800-1600 pF
