Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor: Testing and Inspection

CIRCUIT DIAGRAM

HARNESS INSPECTION PROCEDURE

SENSOR INSPECTION
1. Disconnect the knock sensor connector.
2. Measure resistance between the terminal 2 and 3.
Standard value about 5 M Ohms [at 20 °C (68 °F)]
3. If the resistance is continual, replace the knock sensor.
Tightening torque
Knock Sensor 16 - 28 N - m (160 -250 kg.cm, 11.8 -1 8.4 lb.ft)
4. Measure the capacitance between the terminal 2 & 3.

Standard Value 800-1600 pF