Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 1999 >> Tiburon L4-2.0L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Crankshaft Position Sensor >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Testing and Inspection




CIRCUIT DIAGRAM










HARNESS INSPECTION PROCEDURE




SENSOR INSPECTION
1. Disconnect the crankshaft position sensor connector
2. Measure the resistance between terminal 2 and 3.
Standard Value 0.486 - 0.594 K Ohms at 20 °C (68 °F)

3. If the resistance deviates far from the standard value, replace the sensor.

Standard value: Clearance between the crankshaft position sensor and crankshaft position sensor wheel 0.5 - 1.5 mm (0.020 - 0.059 in.)

Tightening torque: Crankshaft position sensor 9 - 11 Nm (90 - 110 kg.cm, 6.6 - 8.1 lb.ft)
pro multis · About Operation CHARM