Fluid Filter - A/T: Service and Repair

OIL FILTER REPLACEMENT





1. Remove the automatic transmission oil filter using a filter wrench (chain, etc,) if available, after removing the air cleaner assembly.
2. After removing the filter, clean away any automatic transaxle fluid, mud etc. around the transaxle using cloth gloves or rags.
3. Clean the filter bracket side mounting surface.





4. Apply a small amount of automatic transmission fluid to the O-ring of the new oil filter.
5. Install the automatic transmission oil filter hand tight.

NOTE Tightening torque: 11 - 13 Nm

6. Check the level of the automatic transmission fluid.