Rear

DISASSEMBLY





1. Remove the caliper mounting bolts, and remove the caliper assy.





2. Remove the carrier bolt, and remove the carrier with brake pad.





3. Remove the piston boot.
4. Remove the piston assy.





5. Remove piston seal with finger tip.

CAUTION: Do not use sharpened tools to prevent damage to inner cylinder.

ASSEMBLY





1. Check for worn, damaged, or ousted piston bore and piston. Replace the damaged parts if necessary.
2. Check for damaged piston seal, boot, and pin insulators.








3. Apply a recommended lubricant to the above parts.





4. Push the piston into the caliper.





5. Align the piston mating mark to upward as shown in illustration.