Shift Cable: Service and Repair

REMOVAL





1. Remove the console upper cover plate and than remove the console upper cover.
2. Remove the floor console.





3. Remove the nut and washer.





4. Remove the control cable clip.
5. Remove the shift lever mounting bolts and the bulb connector.
6. Remove the shift lever assembly.





7. Remove the knob mounting screw.
8. Remove the selector knob.





9. Remove the indicator.





10. Remove the clip, flange nut from the transaxle sides.
11. Remove the transaxle control cable assembly.
12. Remove the shift lock cable and the key lock cable.

INSTALLATION
1. Apply a coating of the specified grease to the interior of the adjust bushing.
Specified grease: Chassis grease SAE J310, NLGI No.0





2. Move the shift lever and the transaxle range switch to the "N" position, and instal the transaxle control cable.





3. When connecting the control cable to the transaxle mounting bracket, install the clip until it contacts the control cable, in the position shown in the illustration.





4. When connecting the control cable to the shift lever mounting bracket, install the clip until it contacts the control cable.
5. Install the control cable, the key lock cable and the shift cable mounting bolt.
6. Install the indicator and the bulb connector.
7. Install the selector knob.
6. Install the shift lever assembly.
9. Install the nut and washer.





10. Install the console cover plate and upper cover.