Crankshaft, Engine
| Crankshaft | Journal O.D | 61.982 - 62.000 Millimeter (mm) | |
| Pin O.D. | 47.982 - 48.000 Millimeter (mm) | ||
| Out-Of-Roundness Of Journal And Pin | Max. 0.03 Millimeter (mm) | ||
| Taper Of Journal And Pin | Max. 0.005 Millimeter (mm) | ||
| End Play | Specifications | 0.070 - 0.250 Millimeter (mm) | |
| Limit | 0.3 Millimeter (mm) | ||
| Crankshaft Bolt | 180 - 190 Newton Meter (Nm) | ||
| Crank Position Sensor Wheel Screw | 11 - 12 Newton Meter (Nm) | ||
| Main Bearing Cap Bolts (M10) | Tightening Torque | First Pass | 27-33 Newton Meter (Nm) |
| Second Pass | 90-94 Degrees | ||
| Main Bearing Cap Bolts (M8) | Tightening Torque | First Pass | 16-20 Newton Meter (Nm) |
| Second Pass | 90-94 Degrees |