A/T - Adaptive Value Resetting Procedure

RESETTING AUTOMATIC TRANSAXLE ADAPTIVE VALUES

MODEL: 2003 ELANTRA, 2005 TUCSON, SONATA, XG350, SANTA FE, TIBURON

DESCRIPTION:

The transaxle controller adaptive values download to the controller EPROM when the ignition key is turned "OFF", then upload when the ignition key is turned "ON". For this reason, the adaptive values cannot be reset by disconnecting the battery cable.

The Hi-Scan Pro must be used as shown to reset the adaptive values in order to provide smooth shifts after the following repairs:

^ Replace automatic transaxle.

^ Reprogram transaxle control module (TCM).

PROCEDURE:

Attach the Hi-Scan Pro to the data link connector (DLC):

^ Select vehicle.

^ Select "AUTOMATIC TRANSAXLE" menu.

^ Select "RESETTING ADAPTIVE VALUES" press "ENTER"





^ Press "ENTER", then "REST" (F1)





AFFECTED VEHICLES

WARRANTY INFORMATION:

Applicable warranty coverage applies.