Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2003 >> Elantra L4-2.0L >> Repair and Diagnosis >> Powertrain Management >> Tune-up and Engine Performance Checks >> Idle Speed >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Idle Speed: Testing and Inspection

SERVICE ADJUSTMENT PROCEDURES

IDLE SPEED

NOTE: Before adjusting, check that the spark plugs, injectors, idle speed control actuator (ISC actuator), compression etc. are normal

CHECK CONDITIONS
- Engine coolant temperature is 80 to 95 °C (176 to 205 °F).
- Lights, electric cooling fan and all accessories are off.
- Transaxle is in neutral ("P" or "N" range for A/T vehicles).
- Steering wheel is in a straight forward position (Vehicles with power steering).

1. Install a tachometer to the primary coil side or connect the scan tool to the data link connector.
2. Start and run the engine at curb idle speed.
3. Run the engine for more than 5 seconds at an engine speed of 2,000 to 3,000 rpm.
Then, run the engine at idle for 2 minutes.

4. Read the idling rpm.
Idle speed 700 ± 100 rpm
pro multis · About Operation CHARM