Air Bag Control Module: Service and Repair

Air Bag Control Module (SRSCM)


REMOVAL AND INSTALLATION






1. Disconnect the negative (-) baffery terminal.









2. Disconnect the wire connectors from the front seats and then remove the front seats.

CAUTION
-Take care not to scratch the trim when removing the front seats.






3. After removal of the shifter knob, remove the floor console upper cover with a flat-bladed screwdriver.






4. Remove the screws holding the floor console assembly and the pull the floor console out.






5. Remove the floor console side cover.






6. Remove the air bag control module.
7. Installation is the reverse of removal.