Rear Wheel Alignment
REAR WHEEL ALIGNMENTTOE-IN
Standard value: 4 +3/-1 mm (0.16 +0.12/-0.04 inch)
NOTE:
^ Adjust the toe-in by turning the tie rod end of the rear suspension arm.
Left tie rod: Clockwise direction : ton-in
Right tie rod: Clockwise direction : toe-out
A variation of toe by a rotation of the tie rod
About 6 mm (0.60)
^ The cam bolt should be adjusted to a maximum of 90° left or right from the center position.
CAUTION: After adjusting the tie rod, tighten both nuts to the specified torque.
Specified torque 50 - 60 Nm (500 - 600 kg-cm, 37 - 43 ft. lbs.)