Shift Cable: Service and Repair

MANUAL TRANSAXLE SHIFT CONTROL
REMOVAL





1. Remove the shift knob and the rear console.





2. Remove the front console.





3. Remove the cable mounting bolts of the lower dash board.





4. Remove the cotter pin of the shift cable.





5. Remove the cotter pin of the selector cable.





6. Remove the clip of the shift cable and the selector cable.
7. Remove the shift lever assembly.

INSTALLATION
Installation is the reverse of the removal.

INSPECTION
1. Check the select cable for proper operation and for damage.
2. Check the shift cable for proper operation and for damage.
3. Check the boot for damage.
4. Check each bushing for wear, abrasion, sticking, restricted movement or damage.
5. Check for a weak or damaged spring.