Overhaul

DISASSEMBLY AND REASSEMBLY

1. Disassembly the front seat.

CAUTION: SRS components are located in this area. Review the SRS component locations, precautions, and procedures in the Restraint Systems before performing repairs or service.

2. Reassemble is the reverse of disassembly.

NOTE:
- Route the seat wire harness and recline cable correctly.
- Make sure the bushing and pivot washer are installed correctly.
- Apply multipurpose grease to the moving portion of the seat track.
- To prevent wrinkles in the seat-back cover, stretch the material evenly over the pad.
- Replace the back panel clips with new ones.