Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oil Pump, Engine

SPECIFICATIONS
Oil pump
Clearance between outer circumference and front case 0.120 - 0.185 mm (0.0049 - 0.0073 inch)
Front case tip clearance 0.025 - 0.069 mm (0.0009 - 0.0027 inch)
Side clearance
Inner gear 0.04 - 0.085 mm (0.0016 - 0.0033 inch)
Outer gear 0.04 - 0.09 mm (0.0016 - 0.0035 inch)

Oil pump sequence





Install the oil pump on the cylinder block.
Place a new front case gasket on the cylinder block. Apply engine oil to the lip of the oil pump seal. Then, install the oil pump onto the crankshaft. When the pump is in place, clean any excess grease off the crankshaft and check that the oil seal lip is not distorted.