Trunk / Liftgate Switch: Testing and Inspection
POWER TAIL GATE SWITCHINSPECTION
OVERHEAD CONSOLE DOOR SWITCH INSPECTION
1. Check the overhead console door switch input/output value by using the diagnostic tool. If the operation of overhead console door switch is abnormal, check the IPM and replace.
2. When checking the overhead console switch operation, select a vehicle type and "IPM".
3. Select a in panel module (IPM) and "02. CURRENT DATA".
4. Check the PSD PTG power control switch and PTG switch output value.
5. Confirm that output is changed by the controlling ON/OFF of each switch on the overhead console.
TAILGATE SWITCH INSPECTION
1. Check the power tailgate control module input/output value by using the diagnostic tool. If the operation of tailgate module is abnormal, replace power tailgate switch.
2. When checking tailgate switch operation, select a vehicle type and "POWER SLIDING/TAILGATE" menu.
3. Select the "POWER TAILGATE" menu to check.
4. Select the sensor output. And then check the power tailgate local switch output value changed by the controlling PTG.
5. If there is no input/output change from OFF to ON during PTG operation, change the power tailgate switch.