Compass: Adjustments
COMPASSADJUSTMENT
CALIBRATION PROCEDURE
If the display read "C", calibrate the compass.
1. Driving the vehicle in a circle at less than 8 km/h 3 times or until the compass heading appears.
2. Driving in a circle in right-handed direction and opposite direction are possible, and if the calibration is completed, the compass heading will appear.
3. Keep driving in a circle until a compass heading appears.
TO ADJUST THE ZONE SETTING :
1. Determine the desired zone number based upon your current location on the zone maps.
2. Press and hold the Feature Control button for more than 6 but less than 9 seconds, the current zone number will appear on the display (B).
3. Pressing and holding the feature control button (A) again will cause the numbers to increment (NOTE: They will repeat 13, 14, 15, 1,2,..). Releasing the button when the desired zone number appears on the display will set the new zone.
4. Within about 5 seconds the compass will start displaying a compass heading again.
TO RE-CALIBRATE THE COMPASS:
There are some conditions that can cause charges to the vehicle magnets. Items such as installing a ski rack or a antenna or even some body repair work on the vehicle can cause changes to the vehicle's magnetic field. In these situations, the compass will need to be recalibrated to quickly correct for these changes.
1. Press and hold the feature control button (A) for more than 9 seconds. When the compass memory is cleared, a "C" will appear in the display (B).
2. To calibrate the compass, drive the vehicle is 2 complete circles at less than 8 KPH (5 MPH).
ZONE MAP