Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2008 >> Santa Fe AWD V6-3.3L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Description and Operation >> Electronic Stability Control (ESC) >> Variant Coding
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Variant Coding

VARIANT CODING
The HECU is programmed with a variant code based on the vehicle powertrain configuration. This variant code is used to determine the appropriate ESC calculations. Variant code programming should be performed whenever an HECU is replaced.





PROCEDURE OF VARIANT CODING
1. Install a PCM (ECM & TCM)/ESC normally.
2. Connect the scan tool to the data link connector located underneath the dash panel.
3. Select vehicle name.
4. Select ANTI-LOCK BRAKE SYSTEM.
5. Select the variant coding.





6. Follow the next procedure according to the comment





7. Confirm the condition, and then push the "REST".





8. If the procedure is finished, the screen is displayed as shown below.





9. IGN off.
10. IGN on.
11. The variant coding is completed.

CAUTION: If the warning lamp (ESC, EBD, ABS) is illuminated, follow the "Variant coding" again.
pro multis · About Operation CHARM