Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2009 >> Genesis Sedan V8-4.6L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Reassembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Reassembly





Reassembly

1. Insert the four oil seal (A).

CAUTION:
Must use new ones when reassembled.




2. Install the spring and rachet (A) by inserting the guide pin.




3. Install the guide plate (A) by installing the special bolts (10ea) with TORX wrench(T27).




4. Install the selector shaft (A), detent disk (B), and connecting rod (C) by installing the holding pin.




5. Install the adapter (A).

CAUTION:
Must use new ones when reassembled.




6. Install the mechatronic (A) by installing the special bolts (10ea) with TORX wrench(T40).

CAUTION:
Be careful not to drop or damage to the mechatronic.




7. After installing the connector housing (B), push the white clip (A) downward.




8. Install the plastic oil pan (A) by installing the special bolts (20ea) with TORX wrench(T40).

CAUTION:
Be careful not to drop or damage to the plastic oil pan.




9. Refill the ATF. (refer to Procedure Of ATF Level Adjustment)
pro multis · About Operation CHARM