Front Seat

Seat Back Cover Replacement
1. After disconnecting the scuff band (A),remove the seat back panel (B).




2. Disconnect the protector (A) from the back frame, then open the zipper (B).




3. Remove the headrest and headrest guide(A).




4. After removing the hog ring clips (A) on the front of seat back and remove the seat back cover (B).

CAUTION:
When removing the hog ring clip, remove the hog ring clip with pressing the wire not to separate the wire from the sponge.





5. Installation is the reverse of removal.

NOTE:
- Be sure to perform PODS re-zero with Hi-Scan (pro) after replacing parts(passenger's)
- To prevent wrinkles, make sure the material is stretched evenly over the cover (A) before securing the hog ring clips (B).
- Replace the hog ring clips with new ones using special tool (C).